Adaptec - подсветка диска

Типичный сисадмин

2016-10-19 22:54

Очередной крит по массиву прилетел от мониторинга, на этот раз Adaptec, первым делом решил зайти посмотреть SMART.

smartctl -d sat -a /dev/sg4
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Black
Device Model:     WDC WD4001FAEX-00MJRA0
Serial Number:    WD-WCC131532894
LU WWN Device Id: 5 0014ee 25ee68fac
Firmware Version: 01.01L01
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Aug 16 09:05:24 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   049   051    Pre-fail  Always   In_the_past 0
  3 Spin_Up_Time            0x0027   191   147   021    Pre-fail  Always       -       9441
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       20
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       26
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   069   069   000    Old_age   Always       -       22736
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       20
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       19
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1
194 Temperature_Celsius     0x0022   117   097   000    Old_age   Always       -       35
196 Reallocated_Event_Count 0x0032   176   176   000    Old_age   Always       -       24
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       46
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       31

Ищем данный диск по серийнику используя

arcconf getconfig 1

У меня он был как Device #3

      Device #3
         Device is a Hard drive
         State                              : Online
         Block Size                         : 512 Bytes
         Supported                          : Yes
         Transfer Speed                     : SATA 6.0 Gb/s
         Reported Channel,Device(T:L)       : 0,11(11:0)
         Reported Location                  : Enclosure 0, Slot 3
         Reported ESD(T:L)                  : 2,0(0:0)
         Vendor                             : ATA
         Model                              : WDC WD4001FAEX-0
         Firmware                           : 01.01L01
         Serial number                      : WD-WCC131532894
         World-wide name                    : 50014EE25EE68FAC
         Reserved Size                      : 1072920 KB
         Used Size                          : 3814400 MB
         Unused Size                        : 64 KB
         Total Size                         : 3815447 MB
         Write Cache                        : Disabled (write-through)
         FRU                                : None
         S.M.A.R.T.                         : No
         S.M.A.R.T. warnings                : 0
         Power State                        : Full rpm
         Supported Power States             : Full rpm,Powered off
         SSD                                : No
         Temperature                        : Not Supported
         NCQ status                         : Enabled

Нас интерисует Reported Channel,Device(T:L)
Подсвечиваю:

screen arcconf identify 1 device 0 11

И отписываюсь в поддержку по поводу замены.